Early in the summer, temperature in the shadow reaches up to 40 C, while concrete walls exposed to direct sun light heats up and its temperature reaches to 48 C. This heat will gradually penetrate into the building and eventually increases the room temperature. boards of 4CM thickness have the same thermal insulation capability as a hollow concrete block with 22 CM thickness.
WALL INSULATION TYPE :
1- EXTERIOR INSULATION AND FINISHING SYSTEM (EIFS):
Panels are fixed to the exterior wall with cement solvent free adhesives, followed by a thin layer of 3 to 6 mm of cement, finished with a special fiber glass or wire mesh embedded in the base coat.
2- CAVITY WALL INSULATION:
Proven to be the best type of thermal insulation due to its double walling as insulation board is being inserted in a cavity between the external and internal bricks frame. It is used as insulation between wall studs that can block up to 85% of heat transferred through the wall. With cavity wall insulation, your home will be warmer in winter and colder in summer.
3- BLOCK INSERTS:
a- CEMENT BLOCK INSERTS: Small size inserts that are placed within the cement or red bricks. Available in different sizes upon request.
b- SANDWICHED BLOCK INSERTS: EPS molded and sandwiched block where the polystyrene is integrally locked symmetrically into concrete structure (incorporated at the wet stage of concrete mixture) resulting in an excellent thermal insulation and bonding. This is a proven technology for almost two decades, widely used in Europe and Middle East.